Yoke type track roller

Description

BEARING	FOR PIN DIAMETER IN MM	FEATUREES
RSTO	7-60	without axial guidance, outer ring without ribs
STO	6-50	without axial guidance, outer ring without ribs
RNA22.2RSR	10-58	without axial guidance, lip seals on both sides
NA22..-2RSR	6-50	without axial guidance, lip seals on both sides
NATR..PP	5-50	with axial guidance, axial plain washers on both sides
NATV..-PP	5-50	full complement needle roller set, with axial guidance, axial plain washers on both sides
NATR	5-30	with axial guidance, gap seals on both sides
NATV	5-30	full complement needle roller set, with axial guidance, gap seals on both sides
NUTR	15-50	full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides
PWTR..2RS	15-50	full complement cylindrical roller set, with axial guidance, lip seals on both sides
PWTR..2RS-RR	15-50	full complement cylindrical roller set, with axial guidance, lip seals on both sides, with Corrotect® coating
NNTR..-2ZL	50-130	Full complement roller set, axial guidance, central rib, sealing shields with lamellar ring on both sides

Hot Products

FAG deep groove ball bearings are available in radial and axial designs for many different variants. Single-row deep gr

Single-row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage ass

Spindle rollers have outer rings with convex outer surface, solid roller pins and ball and cage assemblies with plastic

Track rollers are self-retaining, single or double row units with extra thick-walled outer rings. These bearings ta